You are not logged in. [Log In] OBDII Home Page » Forums » General Discussion » Pre-OBDII » Auto Xray
Register User       Forum List       Calendar       FAQ
Page 1 of 1 1
Topic Options
#15976 - 09/08/09 09:58 PM Auto Xray
blackdime
Junior Member


Registered: 09/08/09
Posts: 3

Offline
I have a Auto Xray Codescout that will not read any codes from my 1995 S10 2.2L The truck has the 16 pin connector but the scanner just reads "disconnected". The scanner works fine on a 1997 Saturn. What am I doing wrong?

Edited by blackdime (09/08/09 09:58 PM)
Edit Reason: spelling
Top
#15977 - 09/08/09 11:05 PM Re: Auto Xray [Re: blackdime]
kozloski
Member


Registered: 11/25/03
Posts: 812
Loc: Fairbanks, Alaska

content Online
A 1995 S-10 is not fully OBDII compliant. That being said, check the cigarette lighter fuse. It also supplies power for the OBD plug.
Top
#15978 - 09/09/09 05:12 PM Re: Auto Xray [Re: blackdime]
blackdime
Junior Member


Registered: 09/08/09
Posts: 3

Offline
That's a good reason LOL! I did check the cig lighter and it works. Is there another way to pull codes? The CEL comes on intermittenly while driving.
Top
#15979 - 09/10/09 12:20 AM Re: Auto Xray [Re: blackdime]
kozloski
Member


Registered: 11/25/03
Posts: 812
Loc: Fairbanks, Alaska

content Online
Take it to AutoZone and see what they get.
Top
#15982 - 09/10/09 06:33 PM Re: Auto Xray [Re: blackdime]
blackdime
Junior Member


Registered: 09/08/09
Posts: 3

Offline
Yep, will do.
Top
#15986 - 09/14/09 05:16 PM Re: Auto Xray [Re: blackdime]
JEMITCH
Junior Member


Registered: 06/15/06
Posts: 9

Offline
If this is still unresolved you can try the following,Ground pin C (top row third pin from right) on your connector. This will flash your code on your “check engine light”. It will start with a 12. (one flash then two) then the problem code. Follow the OBI-1 Codes, good luck.
Top
Page 1 of 1 1


Moderator:  Joe-OBDII, jpatrick, MJF, AutoTap-Admin 
Hop to:
My Cookies · Mark all read Powered by UBB.threads™ Contact Us · OBDII Home Page · Top

Generated in 0.034 seconds in which 0.004 seconds were spent on a total of 14 queries. Zlib compression enabled.